Technology

System

  • Print parts as large as 10 feet x 10 feet

  • Patented laser stitching process to minimize distortion

  • 5-axis material deposition by coaxial nozzle for homogeneous powder distribution, independent from direction of laser deposition welding

  • Changeable laser spot

  • Fully dense metal parts
  • Controllable microstructure
  • Complete control over internal geometry
  • High dimensional accuracy
  • Fine features as thin as 1 mm
  • Low overhangs
  • 6-axis motion
  • Proprietary 4-hopper powder dispensing system to print up to 4 materials in a single build
  • >25 materials qualified

Software

  • Closed loop feedback controller

  • Reduced Heat Affected Zone (HAZ)

  • 6-axis tool pathing software

  • Thermal stress distortion modeling and simulation

  • Automated part pick-up and tool pathing

  • Unique ability to create CAD designs that add to existing parts

  • Unique ability to work in 3D-layers

  • Proprietary vision system for part repair and manufacturing

Direct Metal Deposition

3D Printing

  • Print parts as large as 10 feet x 10 feet

  • Single- or multi-material

  • 5-axis material deposition by coaxial nozzle for homogeneous powder distribution, independent from direction of laser deposition welding

  • Print on top of existing parts

  • Ideal replacement for low-volume high-mix castings and forgings

Cladding

  • Clad parts as large as 10 feet x 10 feet

  • Single- or multi-material

  • Clad complex parts with internal channels and other critical features

  • 5-axis material deposition by coaxial nozzle for homogeneous powder distribution, independent from direction of laser deposition welding

  • Repair worn-out parts by cladding existing part

  • Machining, heat treatment and inspection

  • Ideal solution for refurbishing parts that have limited damage

Direct Metal Deposition Systems

DMD 105D

DMD 105D

1ft x 1ft x 1ft
Up to 5 lbs./hour metal powder deposition rate

DMD 505D

DMD 505D

5ft x 3ft x 2ft
Up to 5 lbs./hour metal powder deposition rate

DMD 44R

DMD 44R

5ft x 3ft x 5ft
Up to 5 lbs./hour metal powder deposition rate

DMD Multi-nozzle System

DMD Multi-nozzle System

10ft OD x 10ft Height
Up to 20 lbs./hour metal powder deposition rate with 4 nozzles

DM3D Materials

  • 4140
  • 4340
  • 300 Maraging
  • H13
  • P20
  • P21
  • S7
  • Aermet 100
  • CPM-1V
  • 304
  • 316L
  • 17-4
  • 15-5
  • 420
  • JBK-75
  • Invar 36
  • IN 625
  • IN 718
  • C-276
  • Mar-M-247
  • Hastelloy-X
  • Nistelle-C
  • Waspalloy
  • CP Ti Grade 2
  • Ti-6Al-4V
  • GRCop 42
  • C18150
  • C71500
  • C96400
  • Al Bronze
  • Al-10Si-Mg
  • A6061 RAM2
  • A2219
  • Scalmaloy
  • A7075 (7SM2)
  • Stellite 6
  • Stellite 21
  • Stellite 31
  • Stellite 706

DM3D Material Properties

Titanium

Property As Printed (Average) After Heat Treatment (Average)
Modulus of Elasticity 112 (16.3) GPa (MSI)
Ultimate Tensile Strength 1140 (165) 958 (139) MPa (KSI)
Yield (0.2% offset) 1045 (151) 862 (125) MPa (KSI)
Elongation at Break 8 14 %
Hardness (HRC) 38

Nickel

Property As Printed (Average)
Modulus of Elasticity 188 (27) GPa (MSI)
Ultimate Tensile Strength 795 (115) MPa (KSI)
Yield (0.2% offset) 600 (87) MPa (KSI)
Elongation at Break 36 %
Hardness (HRC) 15

316L Stainless Steel

Property As Printed (Average)
Modulus of Elasticity 168 (24) GPa (MSI)
Ultimate Tensile Strength 610 (88) MPa (KSI)
Yield (0.2% offset) 495 (72) MPa (KSI)
Elongation at Break 67.5 %
Hardness (HRC) 23

17.4PH Stainless Steel

Property As Printed (Average) After Heat Treatment (Average)
Modulus of Elasticity 163 (24) 195 (28.3) GPa (MSI)
Ultimate Tensile Strength 1014 (147) 1424 (207) MPa (KSI)
Yield (0.2% offset) 565 (82) 1289 (187) MPa (KSI)
Elongation at Break 9 13 %
Fully Integrated Direct Metal 3D Printing

The Better, Faster, Cheaper Metal Additive Manufacturing Solution

Experience cutting-edge 3D metal printing technology designed for the manufacturing industry in the USA. At DM3D, we specialize in delivering reliable Metal 3D Printing solutions, ensuring unmatched precision for industries ranging from aerospace to healthcare. Our industrial 3D printers integrate seamlessly with modern production lines, offering high performance at a competitive industrial 3D printer price.

Are you concerned about 3D metal printing process validation or struggling with the metal 3D printer cost? Our innovative approach addresses these pain points with efficient designs and cost-effective materials like metal filament for 3D printing. With our expertise, businesses can leverage 3D printing in the manufacturing industry to reduce production time and enhance product quality.

Stay ahead in the future of 3D printing with solutions tailored to complex geometries and high-performance applications. Whether you’re exploring the amorphous metal 3D printing process or looking for the best industrial 3D printer, we’ve got you covered.

Get started today! Contact us to discover how DM3D can transform your manufacturing process with our advanced 3D metal printer solutions.